Why Drywall Sanding is Important

The walls inside your home are probably drywall. You may choose to install tiles or use flat paint to decorate your walls. Of course, all wall décor ideas are welcomed. However, you first have to ensure that the installation of the drywall is done properly to achieve the look that you want.  

One of the most important things to consider is drywall sanding. If you ignore this, flaws will keep you from installing tiles or show under the flat residential painting.  

Here are a couple of reasons why drywall contractors Reno NV include drywall sanding: 

What is Drywall Sanding? 

First of all, let us discuss what drywall sanding is. For those who don’t know, the drywall contractor applies joint compound to cover any flaws during the finishing phase. These flaws include scratches, nicks, joints, and interior angles.  

After covering the joints or cracks with compound, the area should be sanded. The reason for this is that it will help get rid of uneven levels when the job is complete. Sanding often requires special attention because a couple of depressions are difficult to smoothen without scratching the surface. Because of this, scratches may show under a thin layer of flat paint or gloss. Thus, there are grit and fine sandpaper for you to pick. However, a drywall contractor can also use two different types of sanding techniques.  

Wet Drywall Sanding 

The benefit of wet drywall sanding is that it does not leave behind dust. This means that you won’t have to clean up afterward. Of course, this can be much better compared to dry sanding. However, there is also a disadvantage. The results will not be the same. The reason for this is that the tool used in wet drywall sanding is not the same as the tool used in drywall sanding. When it comes to wet drywall sanding, the contractor will use a sponge. It is a unique sponge that is almost similar to the carpet padding. Oftentimes, contractor will also use a simple cloth, especially if you only need a slight sanding. Wet drywall sanding is ideal if you choose to go for heavy drywall finish or plan to cover with wallpaper, wainscoting, and tiles. This is not the ideal technique if you are planning to apply semi-gloss, flat, or gloss paint since the flaws will be visible. 

Regular Drywall Sanding 

As the name implies, it is just regular sanding. A drywall contractor will utilize a sander to smoothen the uneven areas generated by the use of joint compound. Unlike wet drywall sanding, regular drywall sanding is a messy task since it leaves behind dust. Also, you might have to be patient when it comes to regular drywall sanding because it should be done with caution to prevent scratches and holes in the surface.  

To properly do the job, a professional drywall contractor will have to use the right sander. Also, they have to use a circular motion while applying pressure. Of course, before they sand the drywall, they will have to wait for the joint compound to dry first.